Karcher WD4 V20 Wet and Dry Vac Vacuum | 1.628-211.0 - 20L for Garage, Car Workshop, 1000W, Mains-Powered
Description
20-litre container for high-volume wet and dry tasks 1000W rated power with 240W suction Patented filter box - removes filter without touching dirt No filter change needed between wet and dry vacuuming Blower function reverses airflow for awkward spaces 7.2 m total reach - 5 m cable plus 2.2 m hose Pull and Push container locking - opens without tools 35 mm standard fitting - compatible with Karcher accessories On-board storage for hose, tubes, nozzles and small parts Dimensions (L × W × H) (mm): 384 x 365 x 526 Karcher WD4 Vacuum Cleaner - 20L Wet and Dry Vacuum for Garage, Car and Workshop Built for garage, workshop and outdoor jobs: The Karcher WD4 vacuum cleaner - the WD 4 V-20/5/22 - is a mains-powered wet and dry vacuum designed for use in the garage, workshop, car, caravan, patio and utility room. With a 20-litre plastic container and 1000W rated input power, the Karcher WD4 handles everything from fine plaster dust to liquid spills without requiring a filter change between tasks. The 5-metre power cable and 2.2-metre suction hose give a total operating radius of 7.2 metres, covering large areas without having to move the unit. Patented filter box for mess-free maintenance: The WD4 features Karcher's patented filter removal system, which allows the flat pleated filter to be lifted out of its cartridge without direct hand contact with collected dirt. The filter sits in a removable cassette housed in the filter box on the machine head. This makes switching between dry and wet vacuuming straightforward, as the flat pleated filter stays in place for both tasks. Blower function and practical storage built in: A built-in blower function reverses the airflow through the hose port, allowing you to dislodge debris from awkward corners or blow out a blocked drain rather than vacuuming it. The machine head includes dedicated hose storage, accessory storage, a cable hook, and a small-parts compartment, so the two suction tubes and nozzles stow neatly on the unit when not in use. The Pull and Push container locking system opens and closes the drum quickly without tools. Supplied with a full set of accessories: The WD4 comes ready to use with a 2.2-metre bent-handle suction hose, two 0.5-metre suction tubes (35mm), a combined wet and dry floor nozzle, a crevice nozzle, one three-layer fleece filter bag, and a flat pleated cellulose filter already fitted. The 35mm accessory fitting is Karcher's standard diameter, making it straightforward to add optional brushes, extension tubes or other 35mm accessories from the Karcher range. Shop our full Vacuum Cleaners range at Heavins.ie, with a wide selection of wet and dry vacuums, cylinder vacuums and accessories available for delivery across Ireland. Key Features Patented filter box - removes the flat pleated filter without hand contact with dirt. Wet and dry vacuuming - switches between liquids and dry debris without changing the filter. 20-litre container - large-capacity plastic drum for high-volume tasks. Blower function - reverses airflow to dislodge debris in tight or awkward spaces. 7.2 m total operating radius - 5 m cable plus 2.2 m hose for wide-area coverage. Pull and Push locking system - opens and closes the container quickly without tools. 35 mm standard accessory fitting - compatible with Karcher 35 mm accessories. On-board storage - hose, tubes, nozzles and small parts all store on the machine head. Specifications Energy use (W): 1000 Container capacity: 20 litres Container material: Plastic Suction power (W): 240 Vacuum (mbar, max): 240 Air flow (l/s, max): 55 Sound pressure level dB(A): 73 Power Cable (m): 5 Total operating radius (m): 7.2 Standard accessory (mm): 35 Current type (V/Hz): 220-240 / 50-60 Weight without accessories (kg): 6.9 Weight incl. packaging (kg): 9.7 Dimensions (L × W × H) (mm): 384 x 365 x 526 Warranty: 2 years What's Included in the Box Karcher WD 4 V-20/5/22 wet and dry vacuum cleaner Suction hose: 2.2 m with bent handle and removable handle (plastic) 2 x suction tubes: 0.5 m each (35 mm, plastic) Wet and dry floor nozzle Crevice nozzle 1 x three-layer fleece filter bag Flat pleated filter - cellulose, in removable filter cartridge (fitted) Setup and Care Getting started: Assemble the two suction tubes and connect the hose to the machine head inlet. The flat pleated filter is already fitted in its cartridge inside the filter box. For dry vacuuming, insert the supplied fleece filter bag into the container before use to make emptying cleaner and quicker. Switching between wet and dry tasks: For wet vacuuming, remove the fleece filter bag and leave the flat pleated filter in place - no filter swap is needed. After vacuuming liquids, empty the container and allow the filter to dry fully before returning to dry vacuuming. Cleaning and filter care: To remove the flat pleated filter, press the release on the filter box to eject the cartridge without touching the filter element directly. Tap the filter gently to dislodge loose dust, or