Mill Heating 122-SG2000LED Instant Portable Heater 2000W LED - White, Fan-Assisted Convector
Description
2000W fan-assisted convector with wire heating element Three heat settings - 750W, 1250W, and 2000W Electronic thermostat maintains your chosen temperature Built-in LED display and rotary dial controls Mill Gentle Air - comfortable heat that does not over-dry the air Heats rooms up to 28 m² Tip-over switch and overheat protection included Frost-free mode to protect against freezing Silent operation - suitable for bedrooms and nurseries LOT20 compliant - meets EU Ecodesign efficiency standards Steel front panel and aluminium foot - 5.5 kg 150 cm cord for flexible positioning Manufacturer warranty: 5 years Dimensions: 385 x 620 x 210 mm Mill Instant Portable Electric Heater with LED Display and Fan Fast, Even Heat from a Fan-Assisted Convector: The Mill SG2000LED uses a wire heating element to produce heat rapidly from the moment it is switched on. An integrated fan distributes warm air evenly throughout the room, making it effective in spaces up to 28 m² without the longer warm-up time associated with oil-filled radiators. Three Heat Settings and Electronic Thermostat: Choose from 750W, 1250W, or 2000W to suit the size of the room and the chill in the air. The electronic thermostat and rotary dial allow you to set a target temperature, so the heater cycles on and off to maintain comfort without running continuously. Mill Gentle Air - Comfortable, Clean Heat: Mill's Gentle Air concept is designed to circulate heat without scorching dust particles or drying out the air excessively. The result is a more comfortable heat output that suits bedrooms, nurseries, home offices, and living rooms where air quality matters. Safety as Standard: A tip-over switch cuts power automatically if the heater is knocked over, and a built-in overheat protection system monitors internal temperature continuously. The maximum surface temperature is 80°C, and the unit carries LOT20 compliance under EU Ecodesign regulations for space heaters. Scandinavian Design Built to Last: The SG2000LED has a steel front panel and an aluminium foot that elevates it slightly off the floor, giving it a clean, contemporary profile that sits naturally against a skirting board or in a corner. The white finish suits most interiors, and the 150 cm power cord provides practical positioning flexibility. Shop the full Heating range from Heavins.ie, with delivery available across Ireland. Key Features Wire Heating Element - heats up rapidly from cold for instant warmth. Integrated Fan - distributes heat evenly across the whole room. Three Heat Settings - 750W, 1250W, and 2000W for flexible use. Electronic Thermostat - maintains your chosen temperature automatically. LED Display - shows current settings clearly for easy adjustment. Mill Gentle Air - gentle heat that does not burn dust or over-dry the air. Tip-Over Switch - cuts power automatically if the unit is knocked over. Overheat Protection - monitors internal temperature and shuts off if needed. Frost-Free Mode - keeps a minimum temperature to protect against freezing. LOT20 Compatible - meets EU Ecodesign efficiency standards for space heaters. Steel and Aluminium Build - steel front panel with aluminium foot for durability. Silent Operation - suitable for bedrooms, nurseries, and home offices. Specifications Model: SG2000LED Heater type: Fan-assisted convector heater Maximum power: 2000W Heat settings: 750W / 1250W / 2000W Voltage: 230-240V AC Thermostat: Electronic, adjustable Display: LED Controls: Buttons and rotary dial Heating element: Wire Recommended room size: Up to 28 m² Max surface temperature: 80°C Frost-free mode: Yes Tip-over switch: Yes Overheat protection: Yes Timer: No Wireless connectivity: None IP rating: None (indoor use only) LOT20 compliant: Yes Cord length: 150 cm Cord colour: Black Colour: White Material: Steel front, aluminium foot Weight: 5.5 kg Dimensions (HxWxD): 385 x 620 x 210 mm Manufacturer warranty: 5 years What's Included in the Box Mill SG2000LED Instant Portable Heater Aluminium foot / base (requires assembly) Instruction manual Setup and Care Getting Started: Attach the aluminium foot to the base of the unit using a screwdriver before first use. Place the heater on a flat, stable floor surface with at least 50 cm of clear space around it, and plug into a standard 230-240V mains socket. Choosing Your Settings: Use the rotary dial to set your desired temperature and select a heat output level using the control buttons. The electronic thermostat will cycle the heater on and off to maintain the temperature you have chosen, which helps manage running costs over longer periods. Safe Placement: Position the heater away from curtains, furniture, and other soft furnishings. Do not cover the heater or place objects on top of it during operation. This unit is designed for indoor use only and should not be used in bathrooms or other wet areas. Keeping It Clean: Always switch off and unplug the heater before cleaning. Wipe the outer casing with a dry or lightly damp cloth. Do not