BT1 Ultimate Bathroom Sealant and Adhesive 290ml White BT1535101 TRIBRID Technology
Description
Sealant and adhesive in one 290ml cartridge TRIBRID Technology - bacteria cannot survive on cured surface Kills up to 99.99% of bacteria including MRSA and E. coli Solvent, isocyanate and silicone free Mould, mildew and discolouration resistant EC1 Plus certified - very low emissions A+ Indoor Air Comfort GOLD rated 300% elongation - flexes without cracking ETAG-approved for shower panel bonding without fixings table with water-based ts once fully cured Manufacturer warranty: 1 year BT1 TRIBRID Bathroom Sealant - Anti-Bacterial, Mould Resistant, Solvent Free One Product, Multiple Functions: BT1 acts as both a sealant and an adhesive, removing the need to stock separate products for bathroom installations. Whether you are sealing around a bath, bonding shower panels, or finishing around a shower tray, this single 290ml cartridge handles the full job. It is ETAG-approved for bonding shower panels without additional mechanical fixings. TRIBRID Technology and Bacterial Resistance: BT1 is built on C-TEC's proprietary TRIBRID® Technology, a unique polymer formulation that creates a surface on which bacteria and microbes cannot survive. Tested under MOD ISO 22196:2011, it is proven to reduce bacteria by up to 99.99% and is effective against MRSA, E. coli and Campylobacter. Unlike conventional silicone sealants, it does not discolour, yellow, or develop the black mould staining that is common in bathroom environments over time. Free from Harmful Chemicals: BT1 contains no solvents, isocyanates or silicone, making it suitable for use in kitchens, bathrooms, hospitals, clinics and other hygiene-sensitive settings. It carries GEV-EMICODE® EC1 PLUS certification for very low emissions, an A+ Indoor Air Comfort GOLD® rating, and an ISEGA Food Preparation Certificate. It is also accredited by the Asthma and Allergy Association and complies with BREEAM, LEED and WELL environmental regulations. Flexible and Durable Once Cured: BT1 cures to a neutral cure finish with an elongation at break of 300%, meaning it accommodates natural movement in surfaces without cracking or shrinking. It has a tensile strength of 290 N/cm² and a hardness of 60 Shore A. The cured sealant is stable across a temperature range of -30°C to +80°C and is resistant to mould, mildew, bacteria, mild detergents and chlorine. Application Notes: BT1 is applied using a standard skeleton or sealant gun and is suitable for internal use only. Application temperature should be between 5°C and 35°C. Once fully cured, it can be overted with water-based ts, though it is not suitable for use with alkyd-based ts. Shop our full Sealants & Adhesives range from Heavins.ie, one of Ireland's best-stocked independent hardware retailers. Key Features TRIBRID® Technology - C-TEC's proprietary polymer formulation; bacteria cannot survive on the cured surface. Anti-bacterial - Tested under MOD ISO 22196:2011; reduces bacteria by up to 99.99%, including MRSA, E. coli and Campylobacter. Solvent, isocyanate and silicone free - Safe for use in hygiene-sensitive environments including hospitals and food preparation areas. EC1 Plus certified - GEV-EMICODE® EC1 PLUS certification for very low emissions. A+ Indoor Air Comfort GOLD® rated - Independently verified indoor air quality certification. ETAG-approved adhesion - Bonds shower panels without additional mechanical fixings. 300% elongation at break - Accommodates surface movement without cracking or shrinking. Mould and mildew resistant - Does not discolour, yellow, or develop black mould over time. table once cured - Compatible with all common water-based ts after full cure. ISEGA Food Preparation Certificate - Suitable for use in food preparation environments. Specifications Brand: BT1 (C-TEC) Model: BT1535101 Colour: White Volume: 290ml Curing system: Neutral cure Full cure time: 24 hours at 3mm depth (23°C, 50% R.
H.) Tack-free time: 140 minutes Skinning time: 25 minutes Application temperature: 5°C to 35°C Operating temperature range: -30°C to +80°C Elongation at break (DIN 53504): 300% Tensile strength (EN ISO 8339): 290 N/cm² / 2.9 MPa Hardness (DIN 53505): 60 Shore A Coverage: 6mm bead x approx. 8m run VOC level: Minimal Interior use only Weight: 500g Manufacturer warranty: 1 Year What's Included in the Box 1 x BT1 Ultimate Bathroom Adhesive and Sealant 290ml - White