Rawlplug SDS Plus Masonary Drill Bit 12mm x 210mm for Concrete and Masonry, diameter, total length, shank, SicherSafe certified
Description
12mm diameter, 210mm total length, 150mm working length SDS Plus shank - fits all SDS Plus hammer drills 160° carbide tip angle for fast drilling in concrete Aggressive grooves extract material quickly and increase drilling speed Centre point prevents slipping at the start of each hole 34CrNiMo6 alloy steel, heat-treated to 52 HRC hardness SicherSafe certified for hole cylindricity and axial alignment Drills concrete, solid brick, hollow brick, natural stone, and aerated concrete block Dimensions: 12mm diameter x 210mm total length (150mm working length) Rawlplug Aggressor SDS Plus Drill Bit for Concrete and Masonry Built for fast, accurate masonry work: The Rawlplug Aggressor RT-SDSA-12/210 is a 12mm x 210mm SDS Plus drill bit designed for drilling in concrete, brick, and stone. Its 160° carbide tip angle gets into the material quickly, while the aggressive flute grooves pull debris out of the hole efficiently, maintaining drilling speed throughout the operation. The centre point ensures the bit starts exactly where you place it, with no sliding across the surface. High-grade steel and deep carbide seating: The body is machined from 34CrNiMo6 alloy steel and heat-treated to 52 HRC, giving it the strength to handle sustained hammer drilling without distorting. The carbide plate is seated very deeply into the drill core, improving the connection between tip and body and contributing to consistent hole quality over the life of the bit. This level of material specification makes the Aggressor a reliable choice for trade applications where bit failure mid-job is not an option. SicherSafe certified hole quality: The RT-SDSA-12/210 holds the international SicherSafe certificate, which confirms extremely high cylindricity and axial alignment in drilled holes. For fixing work where anchors and plugs need to seat correctly, this matters - a geometrically exact hole ensures the fixing performs as rated. The bit also carries the PGM quality mark, confirming it is manufactured in a controlled, certified production process. Shop the full Drill Bits range from Heavins.ie, with delivery available across Ireland. Key Features Shank type - SDS Plus, compatible with all SDS Plus hammer drills. Tip geometry - 160° carbide tip angle for fast entry into concrete and masonry. Flute design - Aggressive grooves for rapid extraction of drilling debris and sustained drilling speed. Centre point - Prevents the bit from slipping at the start of a hole. Steel grade - 34CrNiMo6 alloy steel, heat-treated to 52 HRC hardness. Carbide seating - Very deep carbide plate seating for a stronger connection to the drill core. Certification - SicherSafe certified for high cylindricity and axial alignment; PGM quality mark. Compatible substrates - Concrete, solid brick, hollow brick, natural stone (after site testing), and aerated concrete block. Specifications Manufacturer: Rawlplug Model code: RT-SDSA-12/210 Shank type: SDS Plus Drill diameter: 12mm Total length: 210mm Working length: 150mm Cutter type: 2-cutter carbide plate Carbide tip angle: 160° Steel grade: 34CrNiMo6 Steel hardness: 52 HRC Weight: 0.12 kg Warranty: 1 Year What's Included in the Box 1 x Rawlplug Aggressor SDS Plus Drill Bit RT-SDSA-12/210 (12mm x 210mm)