Rawlplug SDS Plus Masonary Drill Bit 14mm x 160mm SDSA14/160 for Concrete and Masonry
Description
14mm x 160mm SDS Plus masonry drill bit 160° carbide plate attack angle - faster drilling in concrete 100mm working length for deep-bore applications 40Cr steel at 54HRC hardness for durability 2-cutter design with aggressive grooves for rapid debris extraction Centre point prevents slipping at the start of the hole SicherSafe certified for cylindricity and axial alignment Fits most SDS Plus hammer drills Dimensions: 160mm overall length, 100mm working length, 14mm diameter Rawlplug Aggressor SDS Plus Drill Bits for Concrete and Masonry Built for speed in hard materials: The Rawlplug Aggressor SDSA14/160 is a 14mm x 160mm SDS Plus masonry drill bit designed for fast, clean drilling in concrete, brick, reinforced concrete and high-density natural stone. The 160° carbide plate attack angle is the key to its drilling speed, significantly reducing the time needed to work through dense substrates compared with standard angle bits. Construction and precision: The bit is manufactured from 40Cr steel hardened to 54HRC, giving it both the stiffness to drive through masonry cleanly and the toughness to resist breakage under hammer action. A built-in centre point prevents the tip from wandering at the start of each hole, and the aggressive flute grooves pull waste material up and out of the bore efficiently as you drill. Certified hole quality: The Rawlplug Aggressor carries the international SicherSafe certificate, which independently verifies the cylindricity and axial alignment of holes produced by the bit. This matters when drilling for anchors, fixings or brackets where hole geometry directly affects load performance. The bit is suitable for applications including wall brackets, ceiling mounts, TV brackets, satellite dishes, balustrades and ventilated facades. Shop the full Drill Bits range from Heavins.ie, your local hardware and DIY retailer serving customers across Ireland. Key Features 160° Carbide Attack Angle - cuts into concrete faster and reduces overall drilling time. 40Cr Steel at 54HRC - high hardness for drilling efficiency and long working life. 2-Cutter Design - twin cutters with aggressive grooves extract debris quickly to maintain drilling speed. Centre Point - prevents tip slippage at the start of each hole for accurate positioning. SicherSafe Certified - internationally certified for cylindricity and axial alignment of drilled holes. SDS Plus Shank - fits standard SDS Plus quick-release chucks on most hammer drills. Approved Substrates - concrete, reinforced concrete, solid concrete block, solid brick, concrete slab, hollow-core slab and high-density natural stone. Specifications Brand: Rawlplug Series: Aggressor SDS Plus Model code: RT-SDSA-14/160 Shank type: SDS Plus Diameter: 14mm Overall length: 160mm Working length: 100mm Carbide attack angle: 160° Steel grade: 40Cr Hardness: 54HRC Number of cutters: 2 Certification: SicherSafe (cylindricity and axial alignment) Weight: 110g Warranty: 1 Year What's Included in the Box 1 x Rawlplug Aggressor SDS Plus Drill Bit, 14mm x 160mm Plastic hanger for storage