DeWalt 25 Litre Wet and Dry Vacuum with Drum Dust Collector for Construction Sites
Description
25 litre stainless steel drum - resists corrosion and site impacts 1050W motor with 15 kPa suction and 37.8 l/s airflow Power tool take-off socket - vacuum starts and stops with the connected tool Rear blower port - converts to blower instantly Clean Connect cartridge filter for fine dust capture Quick-connect locking hose - 48 mm x 2.1 m 3.05 m power cord with cord-wrap handle and hose strap Large water-resistant on/off switch Dust collector included in the bundle Weight: 6.6 kg Manufacturer warranty: 3 years Dimensions: 563 x 365 x 382 mm DeWalt 25 Litre Wet and Dry Vacuum with Stainless Steel Drum and Dust Collector Built for the Workshop and the Worksite: The DeWalt XMS26WDVAC centres on a 25 litre stainless steel drum that withstands the knocks and impacts of a working site while resisting corrosion from wet pickups - a meaningful step up from standard plastic-drum shop vacuums. At 1050W, it delivers 15 kPa seal pressure and an airflow of 37.8 l/s, handling everything from plaster dust and wood shavings to liquid spills and slurry. The large water-resistant on/off switch is easy to operate even when wearing work gloves. Automatic Start/Stop with the Power Tool Take-Off Socket: The integrated power tool take-off socket lets you plug a sander, saw, planer, or router directly into the unit. The vacuum starts automatically when the connected tool is switched on and powers down the moment the tool stops, so dust and debris are captured at the source without any manual intervention. This keeps the workspace clear and reduces airborne particles throughout the job. Blower Function and Practical Handling: A rear blower port instantly converts the vacuum into a blower - useful for clearing off workbenches, gutters, or outdoor paving without changing tools. The heavy-duty handle doubles as a cord wrap, a dedicated hose strap keeps the 2.1 m hose tidy, and the quick-connect locking hose system keeps connections firmly seated during use. Large stainless steel handles and secure lid latches make lifting and carrying the filled drum straightforward on site. Clean Connect Filtration and Included Accessories: The DeWalt Clean Connect filter works alongside the included foam filter and disposable dust bag to manage fine particles during dry pickup. Switching between wet and dry operation is straightforward: remove the dust bag and foam filter for wet use, refit them for dry. This bundle adds a dust collector to the standard vacuum kit, giving a more complete dust-management setup without purchasing each component separately. Shop the full Vacuum Cleaners range from Heavins.ie, with delivery available across Ireland. Key Features 25 litre stainless steel drum - resists corrosion and workshop impacts, with large handles and secure lid latches for easy transport. 1050W motor - delivers 15 kPa seal pressure and 37.8 l/s airflow for heavy debris and liquid pickups. Power tool take-off socket - vacuum starts and stops automatically with the connected power tool. Rear blower port - converts the unit to a blower in seconds without tool changes. Clean Connect filter - DeWalt's branded cartridge filter for fine dust capture during dry use. Quick-connect locking hose system - 48 mm x 2.1 m hose stays firmly connected during use. Heavy-duty cord wrap handle - keeps the 3.05 m power cord managed and tidy between uses. Dedicated hose strap - secures the hose to the unit for storage and transport. Large water-resistant on/off switch - easy to operate in wet conditions or when wearing gloves. Dust collector included - the XMS26WDVAC bundle pairs the DXV25SPTAA vacuum with a dust collector for a more complete setup. Specifications Model: DXV25SPTAA (retail bundle Power: 1050W Voltage: 230V / 50Hz Drum capacity: 25 litres (18 litres dry capacity) Drum material: Stainless steel Seal pressure: 15 kPa Airflow: 37.8 l/s Hose: 48 mm x 2.1 m Power cord length: 3.05 m Weight: 6.6 kg Dimensions (HxWxD): 563 x 365 x 382 mm Colour: Stainless Steel / Silver Manufacturer warranty: 3 years What's Included in the Box DeWalt DXV25SPTAA 25L stainless steel wet and dry vacuum Dust collector 48 mm x 2.1 m hose 2 x extension wands Floor nozzle Crevice nozzle Clean Connect cartridge filter Foam filter Disposable dust bag Setup and Care Getting Started: Fit the Clean Connect cartridge filter and foam filter before first use for dry debris pickup. Insert the dust bag inside the drum, then connect the hose using the quick-connect locking system. Wrap the power cord around the heavy-duty handle for storage. Switching Between Wet and Dry: For wet pickup, remove the dust bag and foam filter from the drum before use - the cartridge filter alone manages liquid collection. Refit both components when returning to dry debris work. Using the Power Tool Take-Off Socket: Plug the power tool directly into the take-off socket on the vacuum unit. The vacuum will activate automatically when the tool is switched on and will stop when the tool is powered down, requiring no