Actiwash Pro Biocide - Red and Green Algae, Mould, Fungi Remover, 5 Litre, Biodegradable, Bleach-Free ACTIP5L
Description
Professional strength biocide 5 Litre (makes up to 255 L) Removes red, green, and dark algae, mould, fungi 5x more concentrated than Actiwash Domestic Bleach-free, chlorine-free Biodegradable Hard water resistant Long-lasting results Easy to apply Read Actiwash Complete Treatment Guide Actiwash Pro Biocide - Red and Green Algae, Mould, Fungi Remover 5 Litre | ACTIP5L Actiwash Pro is a nearly pH neutral, professional-grade biocide designed to remove and control organic staining on exterior surfaces. Its highly concentrated formula slows recontamination, providing effective and long-lasting results. Safe for both natural and synthetic surfaces, it’s ideal for professional use on driveways, walls, patios, and more. How It Works Actiwash Pro attacks the proteins and cell membranes of microorganisms, releasing nitrogen and phosphorus from cells. Applied as a spray or brush-on, it allows natural weathering to remove the dead biofilm over time. Actiwash Complete Treatment Guide 1. Resin Bound Stone Remove weeds and debris, then saturate the dry surface with diluted Actiwash. If moss is present, wait two weeks for it to turn orange before sweeping up, then apply a final saturation. The biofilm dies within 30 minutes, and natural weathering removes staining over time - green stains disappear within a week, red in 1-2 weeks, and black/dark staining over several months. Annual treatment is recommended. Resin Bound Stone - Dilution of the Concentrate Actiwash Pro: Mild Treatment 40:1 | Heavy Treatment 35:1 Read Full Resin Bound Stone Treatment Guide: https://shorturl.at/FcDI8 2. Roof Remove moss before treatment and protect gutters. Saturate the dry roof with diluted Actiwash by spray or brush. For heavily contaminated roofs, brush agitation is recommended. The biofilm dies shortly after application, and natural weathering removes staining progressively, with green stains fading within a week and darker stains taking several months. Roof - Dilution of the Concentrate Actiwash Pro: Mild Treatment 35:1 | Heavy Treatment 25:1 Read Full Roof Treatment Guide: https://tinyurl.com/yc56uj9s 3. Stonework Clean loose dirt first, then saturate dry stone surfaces with Actiwash. Apply by spray or brush and leave to dry. The treatment kills biofilm within 30 minutes, and natural weathering gradually removes staining - green disappears within a week, red in 1-2 weeks, and black/dark staining over several months. Lichens may be the last to weather away. Stonework - Dilution of the Concentrate Actiwash Pro: Mild Treatment 35:1 | Heavy Treatment 25:1 Read Full Stonework Treatment Guide: https://tinyurl.com/yxmxa8pa 4. Tarmacadam Remove weeds and debris, then saturate with diluted Actiwash. Wait two weeks for green contamination to turn orange, sweep up deposits, then apply a final saturation. The biofilm dies during drying, and natural weathering removes staining progressively. Annual treatment is recommended for continuous cleanliness. Tarmacadam - Dilution of the Concentrate Actiwash Pro: Mild Treatment 40:1 | Heavy Treatment 35:1 Read Full Tarmacadam Treatment Guide: https://tinyurl.com/mrymj4sy 5. Timber Clean loose dirt, then saturate dry timber with Actiwash. Dense timbers require less solution per square meter. If white contamination persists after two weeks, lightly pressure wash and reapply. The biofilm dies within 30 minutes, and staining fades progressively through natural weathering. Re-treat at first signs of recontamination. Timber - Dilution of the Concentrate Actiwash Pro: Mild Treatment 50:1 | Heavy Treatment 40:1 Read Full Timber Treatment Guide: https://shorturl.at/4E24e 6. Cladding Remove loose dirt and identify staining types - note that orange iron staining requires a separate rust remover. Saturate dry cladding with Actiwash, allow to dwell briefly, agitate with a brush, then rinse with water. A final highly diluted spray-and-leave treatment can be applied to prevent streaking on suitable surfaces. Re-treat when contamination becomes noticeable. Cladding - Dilution of the Concentrate Actiwash Pro: Mild Treatment 50:1 | Heavy Treatment 40:1 Read Full Cladding Treatment Guide: https://tinyurl.com/44wkwjks 7. Render Clean loose dirt and identify staining types. Saturate dry render with Actiwash by spray or brush and leave. For heavily contaminated render, brush agitation is recommended. The biofilm dies within 30 minutes, and natural weathering progressively removes staining. Actiwash is safe for through-colored and pebble-dash render types. Render - Dilution of the Concentrate Actiwash Pro: Mild Treatment 40:1 | Heavy Treatment 25:1 Read Full Render Treatment Guide: https://tinyurl.com/2hzd4kxv 7. Paving Remove weeds and debris, then saturate with diluted Actiwash. If moss is present in joints, wait two weeks for it to turn orange, sweep up deposits, then apply a final saturation. The biofilm dies during drying, and natural weathering removes staining over time. Annual treatment is recommended for continuous