Energizer IP44 15W Microwave Motion Sensor LED Ceiling Fitting 1200 Lus - Cool White 1851-38
Description
Microwave sensor Detects movement even through walls and in unusual environments Switches off after your chosen hold-on time 30,000-hour LED lifespan 1,200 lumens / 4,000K cool white IP44 rated 120° beam angle - even light distribution across the room Adjustable hold-on time - 5 secs, 10 secs, 5 mins or 15 mins Lux control - set to activate only when light levels fall below 50 lux Up to 8 metre sensor range Removable white trim Energizer IP44 15W Microwave Motion Sensor LED Ceiling Fitting 1,200 Lumens 4,000K - Cool White A 15W microwave motion sensor LED ceiling fitting with IP44 rating for bathrooms, kitchens, hallways and utility rooms: The Energizer IP44 Microwave Motion Sensor Fitting is a self-contained LED ceiling light with a built-in microwave sensor that automatically switches on when movement is detected and off again after a set hold-on time. At 1,200 lumens and 4,000K cool white, it delivers bright, clear light comparable to a 100W incandescent bulb while consuming just 15W. The microwave sensor technology is more accurate and reliable than a standard PIR sensor, capable of detecting movement through obscured sightlines and in environments where a PIR sensor would commonly false-trigger or miss movement. Sensor range extends up to 8 metres, covering most room sizes from a single ceiling position. Adjustable lux control, hold-on time and IP44 rating for flexible installation across multiple room types: Three adjustable settings give full control over how and when the light operates. Lux control can be set to activate the fitting only when ambient light falls below 50 lux - useful in rooms where natural daylight is sufficient during the day - or disabled entirely so the sensor activates at any light level. Hold-on time is selectable from 5 seconds, 10 seconds, 5 minutes or 15 minutes to suit different room uses. The IP44 rating confirms the fitting is fully suitable for bathroom Zones 1, 2 and 3 as well as kitchens, utility rooms, corridors, hallways and sheltered outdoor spaces. The 300 x 300mm opal diffuser with a removable white trim gives a clean, neutral finish that works in both modern and traditional interiors. A practical, energy-efficient motion sensor ceiling light available in Ireland today. Key Features Microwave sensor - More accurate and reliable than PIR; detects movement even through walls and in difficult environments.
Up to 8m sensor range - Covers most room sizes from a single ceiling position.1,200 lumens / 4,000K cool white - Bright, clear light output equivalent to a 100W incandescent bulb.
Adjustable hold-on time - 5 seconds, 10 seconds, 5 minutes or 15 minutes.
Lux control - Activate only below 50 lux or disable for all-hours operation.120° beam angle - Wide, even distribution across the ceiling area (110° with trim fitted).
Opal PMMA diffuser - Soft, glare-free light output.
Removable white trim - Clean finish for both modern and traditional interiors.
IP44 rated - Suitable for bathroom Zones 1, 2 and 3, kitchens, utility rooms and sheltered outdoor areas.30,000-hour lifespan - Long-lasting LED with minimal maintenance.220-240V input - Standard UK and Irish mains voltage. Specs Power: 15W [confirm - multiple sources list updated version as 17W, confirm with supplier] Lumens: 1,200lm Efficacy: 75 lm/W Colour temperature: 4,000K cool white Beam angle: 120° (110° with trim) IP rating: IP44 Sensor type: Microwave Sensor range: Up to 8m Hold-on time: 5 sec / 10 sec / 5 min / 15 min Lux control: